linux move software raid

The old one has two GB drives that I had setup into a software RAID 0 when ...

The old one has two GB drives that I had setup into a software RAID 0 when I installed Ubuntu on it many moons ago. How can I set those up in the new machine, which already has Ubuntu installed on it without loosing any of the data? I've had no troubles moving mdadm raid arrays [ubuntu] backup and understand mdadm software raid.

⬇ Download Full Version

You really kinda need the original dwn.220.v.ua file. But, as you don'...

You really kinda need the original dwn.220.v.ua file. But, as you don't have it, you'll have to recreate it. First, before doing anything, read up on.

⬇ Download Full Version

Assuming you already have mdadm installed on the new system (if not, instal...

Assuming you already have mdadm installed on the new system (if not, install it with sudo apt-get install mdadm), it should be activated.

⬇ Download Full Version

The additional challenges were that I would have to transfer the data off o...

The additional challenges were that I would have to transfer the data off of the old LVM onto the new raid and I would have to do this over the.

⬇ Download Full Version

I'm running CentOS 6 on a server that has two 80 GB internal drives, i...

I'm running CentOS 6 on a server that has two 80 GB internal drives, in a software RAID 1. I want to replace this two internal drives with GB.

⬇ Download Full Version

Solved - we first cloned all 4 drives so we are working with copies and pre...

Solved - we first cloned all 4 drives so we are working with copies and preserving the originals in the current state. hooked the copy drives up to.

⬇ Download Full Version

If you actually have a RAID configured through hardware (i.e., the operatin...

If you actually have a RAID configured through hardware (i.e., the operating system sees fewer physical disks than you actually have) there's no.

⬇ Download Full Version

I've never tried with these specific RAID technologies but it's b...

I've never tried with these specific RAID technologies but it's been my experience that it's best to operate at the filesystem level when attempting.

⬇ Download Full Version

If you want to use Syslinux, then specify --metadata= (for the boot partiti...

If you want to use Syslinux, then specify --metadata= (for the boot partition). As of Syslinux in Syslinux. See also Software RAID and LVM.

⬇ Download Full Version

I want to reinstall Fedora with Amahi on the new machine, and move from . S...

I want to reinstall Fedora with Amahi on the new machine, and move from . So far, my software RAID experience with Linux as proven to be.

⬇ Download Full Version

I'd like to find the simplest proper way to move the existing disks to...

I'd like to find the simplest proper way to move the existing disks to the If it was /dev/md0 then you were using Linux Software RAID and that.

⬇ Download Full Version

I have a software RAID-1 using two IDE harddrives, and I need to move it to...

I have a software RAID-1 using two IDE harddrives, and I need to move it to another computer, I'm not sure how to do this. Is it just a Introduction to Linux - A Hands on Guide Moving a software raid to a new computer.

⬇ Download Full Version

This HOWTO describes how to use Software RAID under Linux. is complete - mo...

This HOWTO describes how to use Software RAID under Linux. is complete - move the contents of your non-RAID root filesystem onto a new RAID device.

⬇ Download Full Version

Is it a hardware raid or a software raid? hw raid: you need the same kind o...

Is it a hardware raid or a software raid? hw raid: you need the same kind of controller in your new server. As one point of a hw raid controller is.

⬇ Download Full Version

Creating a software RAID in linux is easy and has allowed me to move the sa...

Creating a software RAID in linux is easy and has allowed me to move the same pair of drives into multiple systems with different hardware and.

⬇ Download Full Version