quad low side driver

FUNCTIONAL DESCRIPTION. The L is a quad low side driver for lines, lamps or...

FUNCTIONAL DESCRIPTION. The L is a quad low side driver for lines, lamps or inductive loads in automotive and industrial applications. The logic input.

⬇ Download Full Version

L93PI. QUAD LOW SIDE DRIVER. WIDE INPUT VOLTAGE RANGE V UP TO +45V. WIDE OP...

L93PI. QUAD LOW SIDE DRIVER. WIDE INPUT VOLTAGE RANGE V UP TO +45V. WIDE OPERATING SUPPLY VOLTAGE. RANGE FROM V UP TO 32V.

⬇ Download Full Version

The L is a monolithic integrated quad low side driver realized in advanced ...

The L is a monolithic integrated quad low side driver realized in advanced Multipower-BCD technol- ogy. It is intended to drive inductive loads (relays.

⬇ Download Full Version

The Quad Driver is an integrated quad low-side power switch with power limi...

The Quad Driver is an integrated quad low-side power switch with power limitation, load interrupt and shorted load detection, thermal shutdown, er- ror detection.

⬇ Download Full Version

DRV Quad Low-Side Driver IC. 1 Features. 3 Description. The DRV provides a ...

DRV Quad Low-Side Driver IC. 1 Features. 3 Description. The DRV provides a 4-channel low side driver. 1• 4-Channel Protected Low-Side Driver.

⬇ Download Full Version

The MC is a Quad Low Side Driver fully protected switch. This device is a g...

The MC is a Quad Low Side Driver fully protected switch. This device is a general purpose Low Side Driver but has been especially designed to operate.

⬇ Download Full Version

Quad channel Low-Side-Switch (2x5A/2x3A) in Smart Power Technology (SPT) .....

Quad channel Low-Side-Switch (2x5A/2x3A) in Smart Power Technology (SPT) .. R. Gate Driver. 1 Output. O0 .Output. Off. Status. dwn.220.v.ua dwn.220.v.ua Delay.

⬇ Download Full Version

Symbol. Parameter. Value. Unit. VCC. VCC Voltage Range. to 6. V. VS. VS Vol...

Symbol. Parameter. Value. Unit. VCC. VCC Voltage Range. to 6. V. VS. VS Voltage Range. to V. Vspmax. VS Voltage Range for t ≤ ms. -2 to

⬇ Download Full Version

DESCRIPTION. The L is a monolithic integrated quad low side driver realized...

DESCRIPTION. The L is a monolithic integrated quad low side driver realized in advanced Multipower-BCD technology. It is intended to drive lines, lamps.

⬇ Download Full Version

P Quad Low-Side Driver IC. The P provides a 4-channel low side driver with ...

P Quad Low-Side Driver IC. The P provides a 4-channel low side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients.

⬇ Download Full Version

This part and this one from IR are dual channel drivers in an SO-8 package....

This part and this one from IR are dual channel drivers in an SO-8 package. You maybe could use two of these.

⬇ Download Full Version

Normally, the defined requirements for a Quad or Octal Driver are very much...

Normally, the defined requirements for a Quad or Octal Driver are very much affected by the type of protection circuits used on the chip. Fault protection for an.

⬇ Download Full Version

Single/Dual/Quad High Side output with optimized protection function and an...

Single/Dual/Quad High Side output with optimized protection function and analog current feedback for Body/ Lighting/Heater application. Single High Side.

⬇ Download Full Version

The LT is a quad high-side gate driver allowing the use of low cost N-chann...

The LT is a quad high-side gate driver allowing the use of low cost N-channel power MOSFETs for high-side switching applications. It has four independent.

⬇ Download Full Version

PROTECTED QUAD LOW-SIDE DRIVER. WITH FAULT DETECTION and SLEEP MODE. The Ax...

PROTECTED QUAD LOW-SIDE DRIVER. WITH FAULT DETECTION and SLEEP MODE. The AxB, AxEB, and AxLB have been specifically.

⬇ Download Full Version